Warning! Before using the welding machine read the instruction manual carefully! For qualified and specially trained persons only after proper reading of this manual is allowed to use and to maintain this welding machine

Safety Check:

• 
  Make sure that there is no short circuit connection with welder's both outputs.
  
• 
  Make sure that there is always sound output and input wire connection instead of exposing it outside.
  

• 
  Check the welding cable to see if it can continue to be used before it is worn out.
  
• 
  Replace the welder's input cable as soon as it is found to be broken or damaged.
  
• 
  Make sure whether there is enough power supply to make the welding machine work properly. Any power source required to access the welding machine must be installed with some protective equipments.
  

2. Technical specifications

3. 
   Description
   

• 
  Featured with small volume and light weight, it widely used in upholstering field, repairing field and fieldwork;
  
• 
  Excellent arc-piloting feature and melt & drip transition feature;
  
• 
  Applicable in downward welding in the vertical position and the long arc spray transfer welding by way of cellulose electrode;
  
• 
  By various sound protection performance, it can keep the welding machine from overheating, over current and so on. When the main supply compensation is not less than ±15%, it can increase while the welding current reduces. Because of its anti jamming high performance, the control system can respond to the power source, work piece, electrode and operational changes with less than 1m/s speed in order to keep steady output of the current;
  
• 
  Its unique electric arc performances may satisfy the need of different welding procedures;
  
• 
  Easy connection. To conduct external connection, use all the connectors, which can facilitate quick and safe connection with simple but reliable performance.
  

2. 
   . Arc Force. Temporary increase of welding current that prevents the electrode from sticking. This makes drop transfer from the electrode rod clear and smooth.
   
3. 
   . Anti Sticking. Reduced welding current helps to remove electrode in case of sticking without damaging the coating.